AMAZING “LOW DUST” ARBORTECH ALLSAW, PROFESSIONAL ACCESSORIES AND DUST MANAGEMENT
Get In Touch
If you need expert advice on the products you need, fill in the form and we will call you back
ARBORTECH ALLSAW
Saving you £1,000s in time and conservation of materials, making light work of cutting / removing bricks & mortar, soft stone, plastic, wood and composite materials; even tree roots complete with soil and all.
Find Out More
OUR CLIENT’S SAY ABOUT US
I bought a Starmix ISP iPulse H Class 240V with standard wand set in July 2017 to reduce dust during a basement rebuild in my Victorian 1850s house.
After just 18 months I was well on the way to destroying my second house vacuum cleaner and recognised I needed a more robust way of minimising dust in the house to keep the family happy.
It had to have a filtered exhaust, as I found a lot of the dust I was making from taking down lathe and plaster ceilings and stud walls was very fine and just went straight through standard vacuums, and damaging their motors and their clogging filters.
The Starmix has solved ALL my dust problems and has great features.
I like the ability to trigger the vacuum to turn on when I power up a grinder or other electrical device plugged into the front of the Starmix.
The 5m long hose allows me to work up a ladder with the hose attached to a sander for example.
The bag capacity is huge too. I started with polythene waste bags but have moved onto the Certified Fleece Bags.
It has made a huge difference to my working environment and I see it as a long term investment to my health.
Only wish I had bought it 18 months ago when I started.
I also recommend getting the Push Handle as it makes it a lot easier to wheel the device around and store cable and hose when not in use.
Nick Campbell, London. Retired engineer now doing DIY
Before I purchased the Allsaw, I had been hiring it at regular intervals from the National Hire Companies. We use the Allsaw for landscaping primarily, but also for re-grouting, paving and re-pointing work as it keeps the dust down. We use the Plunge Blades on the Allsaw to square cut, remove damaged bricks and replace with new ones. The hurdle for me was the cost of the saw, but it’s definitely more than paid for itself. – 16/10/2017
Andrew Merry - Merry-Matthew Land Services
The Starmix has to be the best and most reliable vacuum i’ve ever had. Being a general builder I have a lot of messy work to clear up and with the Starmix it makes life so easy. Its definitely worth every penny.
Rob Davey Builders
Absolutely fantastic tool.
Previously I had raked out the mortar by hand but this Allsaw AS170 takes out 95% of the mortar with the Plunge Blades & Head Joint Blades on stonework on old Church. We cannot do without it now because it speeds up the job and means I can charge my clients less for doing more.
I have found that by soaking the mortar joint with water, it makes the mortar turn cheesy and makes the AS170 even more effective and increases the life of the blades too.
Chave & Jackson
The Allsaw is a must have tool for anyone in construction, it makes toothing brickwork out very easy.
Turning old brick faces round is no problem. This tool has so many uses, not just cutting bricks out, you can cut old tree roots out too.
This tool is possibly the best tool I have ever used they are also very robust and reliable. I have had mine since 2007 and have only replaced the brushes once.
Would recommend this tool all day long!
Wayne Thompson
The Allsaws have been a ‘God Send’ on this job, over the 16 months I’ve been working here, we must have removed, turned or replaced 20,000 bricks, so they have certainly paid for themselves.
Hewer Builders Ltd
I purchased my AS170 in approx. 2008 and it cost nearly a thousand pounds. This outlay I got back within 6 months due to its value to me.
Apart from one set of new blades and a set of brushes, I have only ever had to have the blades sharpened.
In 30 years of building it is one of only a handful of machines which I can honestly say I bought as soon as I saw it.
Such a wonderful machine and I couldn’t be without it. I tell everyone I know to get one.
Kathryn Construction
I have had the Allsaw for some time now and it has been invaluable. The reason I bought it was because dust is a problem when working in customers’ homes. The Allsaw is far more controllable than a disc cutter and is perfect for those hard to reach cut outs. It is also safer as there are no kickbacks
Smallbone Builders
FREQUENTLY ASKED QUESTIONS:
DELIVERY COSTS
WHAT IS THE DELIVERY COST FOR MY ARBORTECH ALLSAW ?
2-3 Day Service – £7.50
Next Day Service – £15.00
Pre 10am Weekday Service – £20.00
Saturday Delivery – £25.00
IS VAT INCLUDED IN THE PRICES?
No. All prices quoted are excluding VAT, which is chargeable at the current rate in force.
WHAT IS THE DELIVERY COST FOR MY ALLSAW PARTS?
1 x Set of Blades or Allsaw Spares
2-3 Day Service – £7.50
Next Day Service – £15.00
Pre 10am Weekday Service – £20.00
Saturday Delivery – £25.00
WHAT IS THE DELIVERY COST FOR MY ALLSAW SERVICE & COLLECTION?
When The Allsaw Service Centre receive your Allsaw our qualified Technicians will carry out an inspection, they will then write up a report, from this an Estimate for the repair will be raised, this will include any service items recommended for renewal, and a Return Carriage Charge. This will be forwarded to your email address provided for your approval.
Note: There is a minimum £50.00 charge, this includes a Return Carriage Charge of £20.00, the £30.00 Labour Charge covers the Inspection and Report, it also contributes to your repair if you decide to go ahead with it, and often covers the Labour Charge of small repairs, excluding the cost of any Spare Parts required.
WHERE CAN I BUY SPARE PARTS AND HOW SOON CAN I GET THEM?
Spare Parts can be ordered On Line, choose a delivery service that suits your requirements and ensure your order is placed before 2pm to ensure a Next Day Delivery if required.
WARRANTY
DOES THE ALLSAW HAVE A WARRANTY AND HOW DO I CLAIM THIS?
Your Allsaw is covered by a 12 Month Manufacturers Warranty from the date of purchase, a proof of which is required if the Allsaw is returned under Warranty. The Warranty applies only to the Allsaw NOT the Blades or Accessories and does not cover the following Service Items: Drive Belt, Motor Brushes, Switch, and Supply Cable.
Note: This 12 Month Manufacturers Warranty covers Allsaws used in the Private Sector, General Contracting and Construction Industry and does not apply to Allsaws owned and used in the Hire Industry where different terms apply. If your Allsaw fails within this 12 Month from a fault other than Service Related Items as listed above: See Trouble shooting questions above. Find link to The Allsaw Service Centre, Repair Form pdf Complete this form ensuring that you: Clearly provide: a Return Delivery Address, Contact Telephone Number, Contact email address, and advise what is wrong with your Allsaw. Send your Allsaw without* any Blades or Accessories – in a CARDBOARD BOX with plain packaging to:
The Allsaw Service Centre
Unit C Longmead Business Centre
Blenheim Road
Epsom, Surrey
KT19 9QQ
Telephone: 01432 346 850
* NOTE: The Allsaw Service Centre do not take responsibility for any Blades or Accessories returned with your Allsaw.
HOW LONG IS THE WARRANTY ON THE AS170 BUNDLE DEAL?
24 months
MACHINE
WHAT IS THE WEIGHT OF THE ALLSAW?
Weight with BL170GHP General Purpose cutting blade – 9.5lb (4.3Kg)
WHAT SIZE IS THE ALLSAW?
Dimensions without blades: Length – 17 7/10” (450mm). Width – 3” (75mm). Height – 9 9/20” (240mm)
WHAT IS THE VIBRATION LEVEL WHEN USING THE MACHINE?
Vibration 7.7 m/s2
WHAT IS THE ELECTRICAL RATING?
Electrical rating nominal 110 / 240 VAC, 50-60 Hz 13A
WHERE CAN I FIND OPERATOR INSTRUCTIONS?
HOW DO I PROTECT MYSELF FROM DUST?
Always wear a suitable dust mask – to provide ffp3(s) protection. DUST EXTRACTION
The AS170 Allsaw can be fitted with a Dust Extraction Funnel (A17020) which will significantly reduce airborne and heavy dust when used correctly. It is attached to the wire guard and extraction fitting.
The adjustable dust extraction funnel is replaceable when it becomes worn. The dust extraction fitting has a standard 30mm bore, a Stepped Rubber Adaptor (A17080) connects to the vacuum. CAUTION Verify that the dust extraction vacuum being used has a filter system appropriate for the material being cut. Incorrect filtration can result in inadequate dust control, causing a hazard to the operator, bystanders, the public and the environment. Note: HSE are now enforcing Certified M or H Class Vacuums as the required filtration level for the containment of Silica Dust. See our range of M & H Class Dust Control Vacuums
HOW DOES THE ALLSAW COMPARE WITH A BRICKSAW / SPINNER?
The AS170 Allsaw has a unique patented orbital cutting action of two reciprocating blades, which strike and rake whilst in action, this allows the cutting of brick (not engineering or dense bricks), mortar, and masonary to 50mpa faster than traditional reciprocating saws. This cutting action also produces minimal amounts of airborne dust, offering a controllable and safe operation, with the ability to cut to a depth of 120mm (4¾”), cut square corners, single brick removal, cutting dirty soil impregnated wood, tree roots etc . See Page 1 of the AS170 Allsaw Instruction Manual pdf
PURCHASING QUESTIONS
IS THERE A MINIMUM ORDER QUANTITY ON BLADES & PARTS?
No. There there is no minimum order quantity, but all orders are subject to carriage, and we do not split packs.
CAN I BUY THE BUTTON BY THE TRIGGER?
No. This is an integral part of the switch, so a complete switch is required if the locking button has broken off.
WHAT IS THE IAN KEY/TORQUE KEY FOR?
FITTING/CHANGING BLADES
USE ONLY the special Ian/Torque Key supplied with the saw to change the blades and tighten the bolts. The Ian/Torque Key tightens the Blade Bolts to the correct torque 18Nm, this is achieved when the long shaft of the Ian/Torque Key meets and touches the short shaft going into the Blade Bolt as you tighten the bolts. See the AS170 Allsaw – Changing the Blades using the Ian Torque Key pdf
WHAT SIZE ARE THE ALLSAW BLADES?
WHAT CAN THE ALLSAW BE USED FOR?
WHAT IS THE NAME OF THE BOOT/HALF MOON BLADES?
General Purpose Blades. Code: BL170GHP
WHAT ARE THE PART NUMBERS FOR THE ALLSAW?
AR-AS170-240 (for a 240 volt machine) and AR-AS170-110 (for a 110 volt machine)
WHAT IS THE DIFFERENCE BETWEEN THE DUST EXTRACTION BOOT/FUNNEL AND THE VACUUM ADAPTOR?
The Dust Extraction Boot (which is a funnel shape) and also known as the Dust Funnel – A17020, is a collapsable dust boot which fits around the blade it attaches to the Wire Guard and the Vacuum Extraction Fitting. The Vacuum Adaptor – A17080, is a stepped rubber adaptor which attaches a dust extraction vacuum to the Vacuum Extraction Fitting. See the Allsaw Standard Kit pdf for pictures
WHAT IS THE ‘ROCKING ACTION’?
As the blades are not spinning like an angle grinder, and only move 12 -15mm overall, there is nothing to drive the dust out from under and around the blade. ‘Sawing’ (like you would a handsaw) and ‘Rocking’ the ALLSAW, clears the dust from under the blades as they come out of the cut, keeping the blades cool and giving them a clear path to continue cutting. See page: 8 of the AS170 Allsaw Instruction Manual pdf
WHAT IS THE ‘SCRATCH TEST’?
How long the blades last is very dependent on how the Allsaw is used and what materials it is used on. Used with the ‘sawing/rocking motion’ in softer materials and mortars the blades can last a very long time. The key to long life is to know what you are cutting, keep the saw moving in the cut to clear the dust from around the blades which helps to keep the blades cool, also avoid hammering the ends of the blades, as this wears away the metal that hold the Tungston Carbide Teeth, and only apply enough pressure to keep the saw in contact with the masonry. If the Allsaw is bouncing and there is heavy vibration whilst trying to cut a material then it is very likely the material is too hard for the Allsaw to cut.
CAUTION: Do not use on engineering or dense hard bricks, concrete, metal, hard stone, or very dense materials, as these materials will cause damage to the teeth.
HOW FAR DO THE BLADES MOVE WHEN IN MOTION?
12 – 15mm on standard blades (i.e. not the XL Blades) dependent on the type of blade
REPAIRS/ SERVICING
WHERE CAN I GET MY ALLSAW REPAIRED/SERVICED?
Firstly you need to complete the repair form, you can download this by clicking here. Please ensure that you: Clearly provide: a Return Delivery Address, Contact Telephone Number, Contact email address, and advise what is wrong with your Allsaw. Send your Allsaw without* any Blades or Accessories – in a CARDBOARD BOX with plain packaging to:
The Allsaw Service Centre, Unit C Longmead Business Centre, Blenheim Road, Epsom, Surrey KT19 9QQ Telephone: 01432 346 850
* NOTE: The Allsaw Service Centre do not take responsibility for any Blades or Accessories returned with your Allsaw.
HOW MUCH WILL THE REPAIR COST?
When The Allsaw Service Centre receive your Allsaw our qualified Technicians will carry out an inspection, they will then write up a report, from this an Estimate for the repair will be raised, this will include any service items recommended for renewal, and a Return Carriage Charge. This will be forwarded to your email address provided for your approval.
Note: There is a minimum £50.00 charge, this includes a Return Carriage Charge of £20.00, the £30.00 Labour Charge covers the Inspection and Report, it also contributes to your repair if you decide to go ahead with it, and often covers the Labour Charge of small repairs, excluding the cost of any Spare Parts required.
HOW DO I GO ABOUT SENDING THIS TO YOU?
SEE THE ANSWER TO: Where can I get my Allsaw Repaired/Serviced above
IS THIS SERVICE/REPAIR COVERED UNDER WARRANTY?
Your Allsaw is covered by a 12 Month Manufacturers Warranty from the date of purchase, a proof of which is required if the Allsaw is returned under Warranty. The Warranty applies only to the Allsaw NOT the Blades or Accessories and does not cover the following Service Items: Blade Bolts, Drive Belt, Motor Brushes, Switch, and Supply Cable. Note: This 12 Month Manufacturers Warranty covers Allsaws used in the Private Sector, General Contracting and Construction Industry and does not apply to Allsaws owned and used in the Hire Industry where different terms apply.
TROUBLE SHOOTING QUERIES
BOLTS ARE COMING LOOSE, WHY IS THIS?
If the Blade Bolts have been tightened to the correct torque of 18Nm using the Ian/Torque Key they rarely come loose, unless the threads on the Blade Bolts or in the Conrod are worn or damaged. Always inspect the thread on the Blade Bolts when changing the Blades and replace if damaged or worn.
USE ONLY Blade Bolts supplied by Arbortech, which are supplied with every Genuine New set of blades, and can be purchased as an accessory Code No: A17002 and tighten using the Ian/Torque Key supplied with your Allsaw See the AS170 Allsaw – Changing the Blades using the Ian Torque Key pdf New Ian/Torque Keys Code No: A17074 can be purchased as an accessory as well.
CAN I USE THE SAME CARBON BRUSHES FOR AS160 AND THE AS170?
No. The AS160 and AS170 motors are entirely different so the brushes are not interchangeable.
CAN I USE THE SAME DRIVE BELTS FOR AS160 AND THE AS170?
Yes. The AS160 and AS170 both use the same Drive Belt
CAN YOU BUY ONE SIDE OF THE CONROD ON ITS OWN WITHOUT HAVING TO PURCHASE THE WHOLE ASSEMBLY AND SPRING ASSEMBLY?
No. Arbortech do not supply one half of the Conrod Assembly.
WHAT ARE OUR COMPANY PRICES?
Trade Prices are as displayed on the web site.
DOES OUR COMPANY GET A DISCOUNT?
No. The prices displayed are Trade Nett Prices
HOW MANY BLADES ARE IN A SET?
All Blades are supplied and used as a pair.
WHAT BLADES AND ACCESSORIES DOES THE ALLSAW COME WITH?
See the Allsaw Standard Kit pdf
CAN I UPGRADE MY AS160?
Yes – there is an Upgrade Kit available, this comprises an AS170 motor complete which has been modified to fit the AS160 Gearbox, with adaptor plate and new drive pulleys. The upgrade should only be carried out by a competent person.
CAN THE ALLSAW BE USED FOR CUTTING CONCRETE & CONCRETE BLOCKS?
The Allsaw cannot be used on concrete, or dense concrete blocks. It will cut materials up to 50 mpa, so will cut light density concrete blocks, it depends what the 7.2 Nm concrete blocks have been manufactured from whether the Allsaw is suitable for them. If they have heavy aggregate or granite chippings in these will damage the Tungsten Carbide Teeth on the blades.
WHAT ARE THE BLADES MADE OF?
The body of the blades are mild steel and the Teeth are Tungsten Carbide.
CAN I USE THE ALLSAW FOR ALL BRICKS & MORTAR?
The Allsaw will cut soft – medium density bricks and mortar. By ‘Rule of Thumb’, if the material you wish to cut will scratch to leave an impression with, a nail, screw, screwdriver, etc…. then the Allsaw will cut it when used with a ‘Rocking /Sawing Action. It will not cut engineering, or very hard dense bricks, or very strong cementitious mortars.
See Answer To What is the ‘Rocking Action’ above
CAN I USE THE ALLSAW ON HERITAGE BUILDING SITES?
The Allsaw has been used, and specified for use on numerous Heritage Sites. You may need to obtain the approval for use on your site of your local Listed Building or Heritage Officer first.
WHY HAVE MY BLADES STOPPED WORKING?
If the Allsaw motor is running and the blades are not moving, it is probably because the Drive Belt has broken. Re-Order Drive Belt Part No: A17012 See the AS170 Allsaw – Changing the Blades using the Ian Torque Key pdf
WHY ARE THERE SPARKS COMING THROUGH THE VENTS NEAR THE HANDLE?
Either the Motor Brushes are worn or the Armature is damaged. Advise Checking Carbon Brush Wear, and replacing if worn.*
Good Practice Advice: Ensure that extension leads used are kept as short as possible and cable reels fully unwound, as long extension leads and wound up cable reels reduce the power supply to the motor causing the motor to draw more amps and sparking. If longer extension leads are needed they must be upgraded to 2.5mm.
WHY HAVE THE BOLTS SNAPPED?
Blade Bolts may snap or break if they have not been tighten to the correct torque of 18Nm using the Ian/Torque Key and have come loose while the Allsaw is in use. Check The Blade Bolts for tightness using the Ian/Torque Key regularly whilst the Allsaw is in use, especially if working on harder materials. If the Blade Bolts have been tightened to the correct torque of 18Nm using the Ian/Torque Key they rarely come loose, unless the threads on the Blade Bolts or in the Conrod are worn or damaged. Always inspect the thread on the Blade Bolts when changing the Blades and replace if damaged or worn.
USE ONLY Blade Bolts supplied by Arbortech, which are supplied with every Genuine New set of blades and can be purchased as an accessory Code No: A17002 and tighten using the Ian/Torque Key supplied with your Allsaw See the AS170 Allsaw – Changing the Blades using the Ian Torque Key pdf New Ian/Torque Keys, Code No: A17074 can be purchased as an accessory as well.
MY ALLSAW HAS STOPPED WORKING ALTOGETHER, WHY IS THIS?
1. Check the power supply.
2. Check the fuse in the plug of a 240v Allsaw, or the Transformer on a 110v, also the overload cut out on the Transformer.
3. Check the cable to the Allsaw for continuity, as the cable on the Allsaw moves a lot in use the wires in the cable can break due to fatigue.
4. Check the motor brushes, when they wear down a sprung loaded plastic pin built into the brush pops out to push the brush off the armature, to prevent damage to the armature.
HOW DO I TIGHTEN THE BELT SO IT DOESN’T KEEP COMING LOOSE?
If the Drive Belt is fitted and tensioned correctly, they rarely come loose unless the Allsaw is used incorrectly, using force or without the ‘Rocking Action’, jamming the blades in the cut, then using the motor to free them, thus causing the belt to slip and wear. See the Allsaw Checking and Changing the Drive Belt pdf
HOW DO I TIGHTEN THE BOLTS SO THE BLADES DON’T COME LOOSE?
USE ONLY the special Ian/Torque Key supplied with the saw to change the blades and tighten the bolts. The Ian/Torque Key tightens the Blade Bolts to the correct torque 18Nm, this is achieved when the long shaft of the Ian/Torque Key meets and touches the short shaft going into the Blade Bolt as you tighten the bolts. See the AS170 Allsaw – Changing the Blades using the Ian Torque Key pdf
